odel | Port Connection | Flow Rate | Filter Area(m2) | Grave(kg) | A(mm) | B(mm) |
Y400 | 1.5inch/50mm | 8M3/H | 0.13 | 35 | 760 | 400 |
Y450 | 1.5inch/50mm | 10M3/H | 0.16 | 45 | 815 | 450 |
Y500 | 1.5inch/50mm | 12M3/H | 0.22 | 85 | 880 | 525 |
Y650 | 1.5inch/50mm | 16M3/H | 0.30 | 150 | 1005 | 625 |
Y700 | 1.5inch/50mm | 20M3/H | 0.40 | 210 | 1100 | 700 |
Top mount sand filter specification:
INSTALLATION
Installation had been made simple, the only tools needed is a screwdriver and pipe sealant for plastic.
Locate the Filter on hard, level surface, preferably in a dry, shaded, and well-ventilated area.
1/ Place the empty tank in position.
2/ Fill the tank with water to the level that covers the lateralsabout 1/3 of the tank is recommended.This will avoid damages to the laterals by the
force of the sand when pouring into the filter.
